Bicycle Portable Foot Support Mountain Road Bike Folding Crank Parking Rack Portable Bracket

This bicycle portable foot brace focuses on folding mini + multi-model universal + stable load-bearing + tool-free quick installation. It is specially designed for mountain bikes and road bikes. It has a crank-type parking frame structure and can be stored and carried after folding. It solves the problem that conventional foot braces occupy an area and are not portable. It is a practical cycling accessory for cycling, outdoor parking, and daily storage. It is suitable for all kinds of models. Parking is stable and does not roll over. Core design and performance highlights Folding mini portable, can be accompanied by a car Adopting a crank-type folding design, it is as small as the palm of your hand and weighs only a few tens of grams. It can be directly hung on handlebars, cycling bags, or put into pockets or frame storage bags. It can be carried around for outdoor riding and long-distance travel without burden, saying goodbye to the drawbacks of traditional foot braces that cannot be disassembled and occupy land. It can be used at any time when needed. Universal for all models, no dead ends for adaptation The adjustable snap-on design is suitable for the crank position of various models such as mountain bikes, road bikes, folding bikes, etc. There is no need to distinguish between frame style and wheel diameter. Whether it is a straight beam frame or a special-shaped frame, it can be easily fixed. One is suitable for all riding vehicles, and there is no need to purchase it separately depending on the model. Triangular support structure, stable parking without rollover After unfolding, a triangular mechanical support is formed, with a non-slip rubber pad at the end of the contact with the ground, which increases the friction with the ground. Even if it is parked on different roads such as cement, plastic fields, and outdoor dirt roads, it can firmly grasp the ground. It is more secure to park without rollover under single parking or no-load/light-load conditions. Tool-free quick installation and quick disassembly, super simple operation Snap-on locking design, you can fix the foot support on the bicycle crank with your bare hands, and rotate the locking knob to reinforce it. Release the knob and remove it for one second when disassembling. No screwdriver or other tools are required. It is easy for beginners to operate. The whole process of parking and collecting the car does not exceed 10 seconds, and the convenience is full. Wear-resistant material, strong outdoor durability The main body is made of high-hardness aluminum alloy + engineering plastics, lightweight while taking into account the load-bearing capacity. A single bracket can firmly support the weight of the vehicle, and it is not easy to bend and deform when bumping or falling during riding. The parts that contact the body and the ground are equipped with anti-skid rubber pads, which do not scratch the crank paint or wear the ground, and at the same time improve the support stability. The details are intimate and suitable for multiple scenes The bracket is designed with a smooth rotating shaft at the opening and closing place, which is folded and unfolded without cards, and is not easy to loosen after repeated use; the locking knob has anti-skid lines, which can be firmly screwed by wet hand operation; the overall waterproof and anti-aging, riding in rainy days, outdoor exposure does not rust or crack, and is durable for daily use and outdoor riding. basic adaptation information Applicable models: mountain bikes, road bikes, folding cars, city commuter cars, etc Installation position: at the crank of the bicycle Load-bearing capacity: Can firmly support the weight of conventional adult bicycles Material composition: high hardness aluminum alloy + wear-resistant engineering plastic + non-slip rubber pad Installation method: tool-free snap-on locking, free-hand quick installation and quick disassembly Storage method: After folding, it can be buckled and stored, portable and unburdened. Color selection: black, silver, aluminum alloy primary color, versatile body, not abrupt Installation and usage suggestions Installation and use: Catch the foot support buckle in the appropriate position of the bicycle crank, rotate the anti-skid knob to lock and fix, unfold the bracket to form a triangular support, directly park the vehicle on one side, and gently push the body to check the stability after parking. Storage and carrying: Release the knob after use, fold the bracket to the smallest volume, and hang it on the buckle of the handlebar and riding bag, or put it into a pocket or frame bag, which does not affect the riding operation. Adaptation scene: outdoor cycling temporary parking, parking clock in scenic spots, daily home/campus light storage, long-distance riding halfway rest parking, etc. Maintenance and Precautions Regularly check the firmness of the rotating shaft and the locking knob to avoid loosening during use and affecting the parking stability. After outdoor use, wipe the surface dust and mud with a damp cloth to keep the bracket clean and prevent sediment from entering the shaft to affect the smoothness of opening and closing. Avoid parking the vehicle with heavy loads on the bracket to prevent the bracket from bending and the vehicle from rolling over due to exceeding the load-bearing range. Avoid vigorously squeezing and hitting the bracket when storing, protect the aluminum alloy main body and rubber anti-skid pad, and prolong the service life.