Tent Stove Chimney Heat Shield - High Temp Silicone Insulation Sleeve For Wood Burning Stoves | Fireproof Jacket

Product Name: Tent Chimney Anti-scald Silicone Cover Weight: 396g Silicone tolerance is about 280 degrees Compatible chimney: 4.5-10cm (if exceeding 4.5cm, need to trim the rubber ring yourself) How to use: (1) Tent Chimney Hole: 1. Determine the chimney opening position on the tent, 2. Mark and drill the screw holes for the chimney opening according to the circular steel piece. （2）According to the circular steel piece of the silicone cover, cut two pieces of wear-resistant material with the same shape as the steel piece (thick fabric can also be used instead) This step can also be omitted, but adding wear-resistant material can better protect the tent from damage （3）Place the cut wear-resistant material and steel piece inside the tent opening, align with the screw holes, and insert the screws from inside out (4) Place the Abrasion Resistant material on the outside in sequence, silicone sleeve, steel plate, and secure with nuts and screws (5) Cut off the tent fabric inside the silicone ring to complete the opening (6) After installation, insert it into the chimney to use. When the chimney diameter is greater than 4.5cm, you can cut the silicone ring yourself